core metal
英 [kɔː(r) ˈmetl]
美 [kɔːr ˈmetl]
网络 芯金属; 心铁
双语例句
- A metal net frame is arranged inside an outer shell ( 1), and a plastics foam filtering core is arranged inside the metal net frame.
其结构是在外壳（1）内装有金属网框架，塑料泡沫滤芯置于金属网框架内。 - The iron core and large metal members of transformer may be reliably grounded through oil tank.
变压器铁心和较大金属结构零件均通过油箱可靠接地。 - I like to listen to the grunge, hard rock, hard core, heavy metal and death thrush metal music.
我喜欢听油渍摇滚、硬摇滚、硬蕊、重金属与死亡快速金属音乐。 - A new scheme of one-dimensional metal heterowaveguide array is proposed that the core layer of the metal waveguide is periodically modulated.
提出了一种新的一维金属异质波导阵列的设计方案，即波导芯区周期调制的金属波导阵列。 - Clinical observation of application of casting post core with metal porcelain crown in the repair of anterior teeth
铸造核桩加金属烤瓷全冠应用于前牙修复的临床观察 - Firstly, drill in the capacitor core for removing metal spraying dust, and then clearing, AC high voltage testing, capacitance loss factor testing, good pcs and failures sorting.
先在电容芯管内孔钻孔以去除芯管内喷金粉尘的短路，然后赋能、交流耐压测试、容量损耗测试分选，分选良品和不良品。 - Study and Measurement on the Influence of Magnetic Field of Dry-type Air Core Reactor on Adjacent Metal Loop and Communication Apparatus
空芯电抗器磁场对周围设施影响的测试研究 - Application of Five Core Pillar Rectiformer in Production of Electrolytic Metal Manganese
电解金属锰生产中采用五芯柱式整流变压器 - The control technique of motorcycle emissions is an engineering of comprehensive design and matching optimization taking the catalystic conversion as the core, and the uploading of metal carrier is the kernel of catalystic conversion, also the key technology of preparing the metal carrier catalyst as well.
控制摩托车排气的净化技术是一项以催化转化为核心的综合设计和匹配优化工程，金属载体上载工艺是摩托车催化转化技术的核心，也是制备金属载体催化剂的关键工艺。 - Second, key of the technology is the use of a melt able core which should not only bear pressure of the mold filling metal melt, but also could reduce the resistance of the core to metal contraction by the core being molten;
该技术的重点在于可熔性金属芯的应用，可熔性金属芯既要能使合金液圆满充型，又要在充型结束后熔化以减少收缩阻力； - This research studies the ferrule effect on double-canalled maxillary first premolar to test the hypothesis that the design of ferrule is beneficial to double-canalled teeth restored with cast post and core and metal crown, through three-dimensional finite element analysis.
本试验应用三维有限元应力分析法，理论探讨箍对上颌双根管前磨牙铸造桩核修复后牙体应力分布的影响。 - The gas-generation properties and gas back pressure at core/ metal interface of 4 sores furan sand with high, medium and low nitrogen content was determined.
对四种含氮的呋喃树脂砂的发气特性及砂芯界面气体背压进行了测定，结果表明； - Conclusion: Light-cure post and core has good clinical effect than metal post and core used to restore lower remnant incisor because of its special anatomy.
结论：下切牙由于解剖结构的特殊性，在残冠修复过程中采用光固化树脂核具有更好的临床效果。 - A transiting layer was formed under the surface of the core contacting liquid metal, and round cross-section of the core was also deformed.
型芯在与铝液接触的表面会形成过渡层，圆形的型芯横截面会发生变形。 - Effect of Liquid Core Ratio on Metal Deformation Rate of Re-nurture
液芯率对金属形变的影响 - The experimental results show that all the aluminum honeycomb core, metal rubber annulus and magnetic damping of eddy current can be used as damping materials or modes of the lunar lander.
试验结果表明铝蜂窝圆芯、金属橡胶圆环及涡流磁阻尼都可以用作月球着陆器的阻尼材料或阻尼方式使用。 - The core theory of sheet metal forming simulation software CADEM is introduced. Taking the development of drawing die for front fender as an example, the role of CAE technology is emphasized.
介绍了板料成型CAE软件CADEM主要理论，并以汽车外覆盖件翼子板的拉延模具开发为例，阐明了CAE技术在模具开发中所起的重要作用。 - The relation between the arc luminous core shapes and the metal transfer modes of the pulse MIG welding are also studied and discussed.
文中还对熔化极脉冲焊的电弧形态与熔滴过渡形式的关系进行了研究和讨论。 - The Research and Application of Core-shell Nanoparticles of Metal Oxides
核-壳纳米金属氧化物粒子的研究及应用 - Determination of Gas-Generation Properties of Furan Sand and Gas Back Pressure at Furan Sand Core/ Metal Interface
呋喃树脂砂的发气特性及树脂砂芯-金属界面气体背压的测定 - Methods: One hundred and four residual roots and crowns of anterior were treated with root canal therapy and restored by cast core porcelain fused to metal crown.
方法：选择前牙残冠残根104颗牙齿，在修复前行完善根管治疗，再采用铸造桩核烤瓷冠的方法修复缺损。 - Meanwhile, the double core metal phthalocyanines exhibited higher catalytic activity than that of the single core phthalocyanines.
双核金属酞菁的催化氧化活性要比相应的单核金属酞菁的活性高。 - Objective To repair residual crowns and roots of anterior teeth with casting post core with metal porcelain crown.
目的探讨利用铸造核桩加金属烤瓷全冠来修复前牙残冠、残根的优点。 - During the process of rolling ingot with a liquid core the effect of the liquid core ratio on different factors of metal deformation has been investigated by a simulation experiment.
通过模拟试验，研究了液芯轧制过程液芯率对金属形变各个因素的影响。 - As was confirmed by circular dichroism spectroscopy, the metal ions coordination changed the conformation of the ferrocene core which was dependent on the particular metal ion and its coordination preferences.
圆二色光谱研究表明过渡金属离子的配位作用使该化合物的二茂铁中心的构型发生了变化，变化的程度与过渡金属离子的种类及络合方式有关。 - Nanoshells consisting of a silica core and a noble metal shell have great potential applications for biomedicine, chemosensing and photonic crystals, et al., due to their tunable electric and optic properties based on the sizes and relative dimensions of the core radius and shell thickness.
氧化硅/贵金属纳米壳层具有与尺寸、核壳比相关的特殊电学、光学等性能，在生物医学、化学传感、光子晶体等方面具有极大的应用潜力。 - The center of the fiber is a cylindrical metal core. The metal core is wrapped with a certain thickness of piezoelectric material. Then a thin metal film is coated with a layer of piezoelectric material on the outer surface of the half.
纤维中心是圆柱形金属芯，金属芯外层包裹着等厚度的压电材料，再在压电材料外层一半的表面上镀上一层薄金属膜。 - One of the main using of cellular metallic materials is the sandwich structure with core of high-porosity porous metal.
其主要使用形式之一是由高空隙率多孔金属为芯层构成夹芯结构。 - A typical sandwich structure is composed of two layers of thin composite material plate or metal plate and thick metallic foam core which includes grid, metal foam and lattice truss core.
典型的夹芯结构由上下两层复合材料或金属面板和多孔芯层（格栅、金属泡沫和点阵材料等）组成。